Floureon Lipo RC Batteries
The Batteries That Are Used on Almost All RC Vehicles
This battery set from Floureon represents the balance of performance and high quality. Each battery comprises three cells that share an equal amount of the peak load to reach 30C charge current. This isn’t the highest possible rate, yet, seeing how popular the medium power RC vehicles are, this battery type is the most common. Another obvious advantage of the Floureon Lipo batteries is that they can be installed literally in any RC model of 1:16 scale and larger thanks to their average weight and standard size. The Dean-Style T connector is used here. If yours is different, you can buy an adapter and use it to connect the batteries. The use of the JST-XH connector found in nearly all balance chargers makes it possible to use it with the one you want. The only thing that might cause some discomfort at the beginning is the long cell balancing out-of-the-box. Typically, it takes several discharging/charging cycles before the battery voltage becomes normal.
Gens ace Lipo RC Battery
For Those Who Want to Race Longer
When selecting a battery for a drift model or buggy, the first aspect to pay attention to is the battery discharge current. For such powerful models, using of the Gens ace Lipo RC battery with 50C discharge current will be the best solution. Compared to many low voltage batteries that tend to overheat and discharge in a short while, this one will let your vehicle reach the maximum torque and run significantly longer between recharges. The Gens ace Lipo battery for RC models was specifically designed to fit in the packs of 1:10 and 1: 8 scale models. The only thing that confused us a bit is the battery design. The wires that come out of the end of the battery slightly increase its length and hence, make its installation more complicated in models where a battery is located in the center (like in a rustler). Trimming a fixing spacer inside the case can become a solution to this problem though.
Venom RC LiPo Battery with Universal Plug
Adapters for Different RC Models
When we’ve come across this battery, several of its features attracted our attention. The first one is a number of available adapters that make it compatible with many different RC models. It’s equipped with both standard Traxxas and Tamiya adapters and two slots for Deans and EC3 connectors. That the adapters are interchangeable and can be fastened with special latches is a nice addition. The other thing we liked about the battery is its relatively small weight, 6.2 ounces only, and that it’s possible to use it with such RC models as helicopters and sailboats. Since this RC battery is slightly smaller in size than the standard batteries, using it with 1:10 and 1:16 scale models is only possible with additional fixators like, for example, foam rubber or adhesive tape.
Tenergy T439 5 in 1
Specially for Quadrocopters
This unique set of batteries from Tenergy will perfectly suit small quadrocopters such as UDI 818A and UDI 817. To our liking, the package includes a brand charger that allows you to charge all five batteries simultaneously. The capacity of each battery is 500 mA which gives an RC vehicle about 35-min operating time before it needs recharging. The recharging takes about 90 minutes on average. Speaking of other characteristics, the 15 C discharge voltage rate will be more than enough for a small model of quadrocopter, while the small weight of the battery will not complicate the takeoff path of its flight. The charging adapters, though, could be a bit more loose. Removing them might be quite problematic.
Tenergy High Power Battery Pack for RC Cars
Simple, Reliable, and Affordable
The Tenergy High Power Battery Pack consists of two NiMH batteries that have some evident advantages over batteries of other type. Simplicity of use and maintenance is the important one. Unlike many other RC batteries, these one resist low temperatures and withstand the conditions of high humid environments. If you’re an owner of traggi or crawler, you’ll appreciate the shock-proof properties of the set. The standard size of the battery allows you to pair it with most 1:10 scale radio-controlled vehicles that come fitted with 7.2 V engines. It’s worth saying that the discharge current rate here is pretty low so you may want to consider a more powerful RC battery from our review if you own a race car. For other vehicles, however, it will do alright. The other benefit of the NiMH batteries is that they don’t require a charger.